发电机电阻柜一般配套打包给发电机厂家，许多没接触过的中间商总是乐意我们去现场指导安装，其实发电机电阻柜是一个非常成熟的电气产品，它的安装步骤是非常简单的，首先将电阻柜内隔离开关上端经电缆链接到发电机中性点，将电阻器末端工作接地点链接到接地网上型线  流水槽模具 景观石 检查井钢模具 保定通风管道 隔离墩模具 保定保洁公司，将柜体接地点与接地网连接，柜内如果有二次用电设备，接好工作电源。启动发电机前，闭合电阻柜内隔离开关，将发电机中性点经电阻器接地，然后启动发电机就可以了。
The generator resistance cabinet is generally packaged to the generator manufacturer, and many middlemen who have not contacted with it are always willing to let us go to the site to guide the installation. In fact, the generator resistance cabinet is a very mature electrical product, and its installation steps are very simple. First, isolate the resistance cabinet from the upper end, connect it to the neutral point of the generator through cable, and link the working ground point at the end of the resistor To the grounding network, connect the cabinet grounding point to the grounding network. If there is secondary electrical equipment in the cabinet, connect the working power supply. Before starting the generator, close the isolation switch in the resistance cabinet, ground the neutral point of the generator through the resistor, and then start the generator.